Prof. Dr. Heiko Thömen

Flagship-Projekt Think Earth, Teilprojekt 5: Wiederverwendung und Recycling von Holz

Mineralische Holzwerkstoff-Bindemittel als Alternative zu fossilen Klebstoffen

Upcycling von kostengünstigen Holzsortimenten zu Hochleistungs-Bauelementen (Scrimber)

Entwicklung von nachhaltigen Hotel-Pavillons für verschiedene Klimazonen

Entwicklung eines Schaltschranks für die Sicherheitsstromversorgung mit Funktionserhalt im Brandfall, 2021 - 2023

Stromleitende Möbelplatten, 2020 - 2022

Entwicklung von universell einsetzbaren Möbelverbindern für Leichtbauplatten, 2020 - 2022

Development of a fire retardant based on functionalized minerals, 2019 - 2021

Modellbasierte Automatisierung in der Holzwerkstoffindustrie, 2016 - 2021

Entwicklung eines Klebstoffsystems basierend auf Mikrofibrillierter Cellulose (MFC) für den Einsatz in Holzwerkstoffen, 2019 - 2020

Entwicklung biobasierter Gehäuseteile aus Altpapier- oder Frischzellstofffasern für elektronische Geräte, 2018 - 2020

Phenol- und formaldehydfrei gebundene Glaswolle-Dämmstoffe mit erhöhtem Brandwiderstand auf Basis natürlicher Gerbstoffe, 2017 - 2020

Smart Electronic Furniture, 2018 - 2019

Entwicklung einer flächenisotropen Bauplatte mit erhöhten Festigkeitseigenschaften für den tragenden Einsatz, 2017 - 2019

Entwicklung einer Technologie zur Herstellung kostengünstiger Verbindungsplättchen für den Möbelbau, 2016 - 2019

Prozesssteuerung von industriellen Schleifprozessen und Schleifbandmanagement auf der Basis einer Echtzeit - Werkzeugzustandserkennung, 2016 -2019

Ressobois - Holzfedern für Betten, 2016 - 2018

Entwicklung einer Technologie zum Einsatz multifunktionaler mineralischer Zusatzstoffe in Holzwerkstoffen mit dem Ziel, deren Wirtschaftlichkeit zu erhöhen und deren Brandwiderstand und Emissionsverhalten zu verbessern, 2015 - 2018

Ultraleichte bio-basierte Holzwerkstoffplatte, 2012 - 2016

Entwicklung einer Methode zur Nutzung von Oberflächenmerkmalen für die Optimierung des up-stream-Prozesses in der Span- und Faserplattenherstellung, 2014 - 2015

Tschannen, C., Thömen, H., & Shalbafan, A. (2023). Development of an Electrically Conductive MDF Panel—Evaluation of Carbon Content and Resin Type. In Polymers (Vol. 15, Issue 4). MDPI. https://doi.org/10.24451/arbor.18935

Shalbafan, A., & Thömen, H. (2023). Development of Mineral-Bonded Plywood with Magnesium Oxychloride as a Binder Using the Hot-Pressing Process. In Polymers (Vol. 15, Issue 4). MDPI. https://doi.org/10.24451/arbor.18919

Thömen, H., & Shalbafan, A. (2022). Influence of Pressing Schedule and Adhesive Content on the Rheological Behavior of Wood Fiber-Furnish Mats. In Materials and Structures (Vol. 15, Issue 4). Springer. https://doi.org/10.24451/arbor.16671

Ozyhar, T., Tschannen, C., Thömen, H., & Zoppe, J. O. (2021). Evaluating the use of calcium hydrogen phosphate dihydrate as a mineral-based fire retardant for application in melamine-urea-formaldehyde (MUF)-bonded wood-based composite materials. In Fire and Materials (Vol. 46, Issue 3). Wiley. https://doi.org/10.24451/arbor.16157

Shalbafan, A., Khojasteh Khosro, S., & Thömen, H. (2021). Development of ultra‑light foam‑core fibreboard for furniture application. In European Journal of Wood and Wood Products (Vol. 79). Springer. https://doi.org/10.24451/arbor.16161

13889

Ozyhar, T., Tschannen, C., Hilty, F., Thömen, H., Schoelkopf, J., & Zoppe, J. O. (2020). Mineral-based composition with deliquescent salt as flame retardant for melamine–urea–formaldehyde (MUF)-bonded wood composites. In Wood Science and Technology (Vol. 55, Issue 1). Springer. https://doi.org/10.24451/arbor.13848

Shalbafan, A., Khojasteh-Khosro, S., & Thömen, H. (2020). Consumer behavior assessment regarding lightweight furniture as an environmentally-friendly product. In Wood Material Science & Engineering (Vol. 17, Issue 3). Taylor & Francis. https://doi.org/10.24451/arbor.13882

Shalbafan, A., & Thömen, H. (2020). Improving bio-based poly ( lactic acid ) properties using polycarbonate. 14th International Seminar on Polymer Science and Technology (ISPST 2020). https://doi.org/10.24451/arbor.13885

Thömen, H., & Tschannen, C. (2020). Development of a concept for electrically conductive furniture panels. Society of Wood Science and Technology International Convention. Society of wood science and technology. https://doi.org/10.24451/arbor.14184

Shalbafan, A., Khojasteh Khosro, S., & Thömen, H. (2020). Evaluation of Adhesion Strength of Coatings and Face Layers Properties of Foam Core Lightweight Panels. In Journal of Color Science and Technology (Vol. 14, Issue 1). https://doi.org/10.24451/arbor.13880

Shalbafan, A., Khojasteh-Khosro, S., & Thömen, H. (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products. In European Journal of Wood and Wood Products (Vol. 78, Issue 3). Springer. https://doi.org/10.24451/arbor.11671

Näher, T., Thömen, H., & Burgert, I. (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft. Swiss Wood Innovation Network S-Win. https://doi.org/10.24451/arbor.11261

Shalbafan, A., Nadali, A., & Thömen, H. (2020). A Multifunctional Mineral Binder for Plywood Production: The Effect of Manufacturing Parameters on Bonding Quality. In Materials (Vol. 13, Issue 10). https://doi.org/10.24451/arbor.11898

Shalbafan, A., & Thömen, H. (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features. In Applied Sciences (Vol. 10, Issue 2). MDPI. https://doi.org/10.24451/arbor.10248

Ozyhar, T., Depnering, T., Ridgway, C., Welker, M., Schoelkopf, J., Mayer, I., & Thömen, H. (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties. In European Journal of Wood and Wood Products (Vol. 78, Issue 1). Springer. https://doi.org/10.24451/arbor.9418

Bianchi, S., Thömen, H., Junginger, S., & Pichelin, F. (2019). Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties. In European Journal of Wood and Wood Products (Vol. 77, Issue 1). Springer. https://doi.org/10.24451/arbor.6781

Thömen, H. (2019). Rohstoffe effizienter einsetzen - das Modell dazu. In spirit biel/bienne (Vol. 1). BFH. https://doi.org/10.24451/arbor.9419

Thömen, H., Homerin, B., Bernardy, G., & Steffen, A. (2019). Dichte von Holzwerkstoffen in Echtzeit vorhersagen. In Holz-Zentralblatt (Issue 21). https://doi.org/10.24451/arbor.9489

Thömen, H., & Job, C. (2019). Hochflexible Beleuchtungslösungen in Möbeln. In spirit biel/bienne (Vol. 2). BFH. https://doi.org/10.24451/arbor.9422

Thömen, H., & Wirth, F. (2018). Wohlbefinden - mittels Virtual Reality? In spirit biel/bienne (Vol. 3). BFH. https://doi.org/10.24451/arbor.9446

Thömen, H. (2017). Leichtigkeit im Möbelbau. In spirit biel/bienne (Vol. 1). BFH. https://doi.org/10.24451/arbor.9440

Thömen, H., & Homerin, B. (2017). Modernste Prozessleittechnik - Integration eines mathematisch-physikalischen Modells in ein industrielles Prozessleitsystem. 12. Holzwerkstoffkolloquium. https://arbor.bfh.ch/handle/arbor/39095

Shalbafan, A., Rheme, M., & Thoemen, H. (2016). Ultra-light particleboard: characterization of foam core layer by digital image correlation. In European Journal of Wood and Wood Products (Vol. 75, Issue 1). Springer. https://doi.org/10.24451/arbor.5502

Yoon, Y., Plummer, C. J., Thoemen, H., & Manson, J.-A. E. (2016). Liquid CO2 processing of solid polylactide foam precursors. In Journal of Cellular Plastics (Vol. 52, Issue 2). Sage Publications. https://arbor.bfh.ch/handle/arbor/38242

Thömen, H., & Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess. 11. Holzwerkstoffkolloquium. https://arbor.bfh.ch/handle/arbor/33585

Yoon, Y., Smole, J., Rhême, M., Thömen, H., Plummer, C. J. G., & Månson, J.-A. E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures. 20th International Conference on Composite Materials. https://arbor.bfh.ch/handle/arbor/33629

Benthien, J. T., & Thömen, H. (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels. In Journal of Applied Polymer Science (Vol. 129, Issue 6). John Wiley & Sons, Ltd. https://arbor.bfh.ch/handle/arbor/31828

Benthien, J. T., Schmidt, H., & Thömen, H. (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels. In European Journal of Wood and Wood Products (Vol. 71, Issue 5). Springer. https://arbor.bfh.ch/handle/arbor/32082

Sanabria, S. J., Hilbers, U., Neuenschwander, P. and S., Niemz, P., Sennhauser, U., Thömen, H., & Wenker, J. L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images. In Ultrasonics (Vol. 53, Issue 1). Elsevier. https://doi.org/10.24451/arbor.11283

Ayrilmis, N., Benthien, J. T., Thömen, H., & White, R. H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants. In Journal of Applied Polymer Science (Vol. 122, Issue 5). John Wiley & Sons, Ltd. https://arbor.bfh.ch/handle/arbor/31340

Barbu, M., Romania, B., Ludtke, J., Thömen, H., & Welling, J. (2010). New technology for the continuous production of wood-based lightweight panels. Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. United Nations Economic Commission for European Timber Committee. https://doi.org/10.24451/arbor.11592

Barbu, M. C., & Irle, M. (2010). Wood-based panel technology : an introduction for specialists (H. Thömen & M. Sernek, Eds.). Brunel University Press. https://arbor.bfh.ch/handle/arbor/31104

Shalbafan, A., Luedtke, J., Welling, J., & Thömen, H. (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials. Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. https://doi.org/10.24451/arbor.11641

Thömen, H., & Gonin, M.-A. (2010). European master programs in wood science and technology. Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. United Nations Economic Commission for Europe – Timber Committee. https://doi.org/10.24451/arbor.11604

Thömen, H., & Walther, T. (2010). Vom Holz zum Werkstoff. Berner Fachhochschule Architektur, Holz und Bau. https://arbor.bfh.ch/handle/arbor/31305